Hydrophobicity: High hydrophobicity and water vapor permeability.
Preparation:
Mix SAKRET CLP+ in a clean container with cold water until a homogeneous mass without lumps is obtained.
It is recommended to use a mixer with 600 revolutions per minute.
After the maturation time (~3 minutes), mix again.
The substrate must be dry and solid, with all cracks and voids filled.
Clean the substrate from less stable and/or separating layers.
Particularly dense and/or smooth substrates should be treated with abrasive material.
Absorbent surfaces should be primed with SAKRET BG primer or SAKRET UG primer (diluted in a ratio of 1:3).
Especially smooth concrete surfaces should be primed with SAKRET QG primer.
Technical data refers to a temperature of +20°C and 50% relative humidity. Lower temperatures increase, while higher temperatures decrease the specified values.
During the curing phase, protect from sunlight, drafts, and excessively high temperatures (>30°C).
Protect fresh mortar from rain and rapid drying.
Once the mortar starts to set, do not add water!
Immediately after mixing the mortar, clean containers and tools with water.
Cured mortar can only be cleaned mechanically.
Contains cement, reacts alkaline.
Protect skin and eyes, and follow the technical instructions. If the mortar comes into contact with the eyes, rinse with plenty of water and seek medical attention if necessary.
Protect packaging from weather effects, store on wooden pallets in a cool and dry place, and immediately cover opened packaging.
Our
sellers and their high quality products helps to make Xbau Marketplace one of the fastest-growing
eCommerce platforms for building and construction products in Europe. Whether you’re a small business or
global brand, our innovative marketplace will simplify the selling experience and will help you to get
more customers. Let's grow together!
