FIN Plus / Finishing Filler for Wet Rooms

Product Overview:

• Type: Lime-cement finishing filler for leveling walls and ceilings before painting, wallpapering, etc.
• Suitable For: Various types of mineral surfaces (concrete, plaster)
• Not Suitable For: Gypsum board and other unstable surfaces
• Color: White
• Usage: For indoor applications only

Application Instructions:

Surface Preparation:

• The surface to be treated must be clean, flat, and stable.
• Remove any weak or detached layers from the substrate, including dust, dirt, grease, paint residues, and other debris that may reduce adhesion.
• For highly absorbent surfaces, prime with SAKRET BG or diluted SAKRET UG primer at a ratio of 1:3.
• For friable substrates, use SAKRET TGW deep primer.

Mixing Instructions:

• Mix the dry powder in a clean container with cold water until a homogeneous mixture of the desired consistency without lumps is formed.
• It is recommended to use a mixer with 600 rpm for mixing.
• After a resting time of approximately 5 minutes, remix the mixture.

Application Process:

• Apply the prepared mixture to the surface using a spatula and level it evenly.
• The cured surface can be sanded using fine sandpaper or sanding mesh.