PAR-3314000 / RollCut® applicator

RollCut'® paper joint tape applicator - to unroll, apply and cut

Productivity: Time saving: in a traditional construction project with walls and ceilings, the use of Roll'Enduit® and RollCut'® when applying the joint tape allows an increase in efficiency and a 50% saving in working time

Ergonomics:

• Lightweight construction
• Prevention of diseases of the musculoskeletal system
• Working from the ground avoids falls
• Easy cleaning, there is almost no contamination (harmless cleaning with water)

Teamwork: One person fills, one person inserts the joint tape for higher productivity

Advices:

• SMOOTH WALLS: - after filling the joints, unroll the joint tape from bottom to top. Press the trigger to cut the tape. The joint can now be smoothed
• CEILING: - to apply the joint tape to the ceiling, attach the appropriate extension depending on the height and accessibility. Working heights of up to 3 meters are possible
• HARD TO ACCESS AREAS: - applying the joint tape in hard-to-reach or narrow places. The RollCut® without extension fits in a 1m storage box. (e.g. closets, corridors, toilets, etc.)
• INTERNAL CORNERS: - to apply the joint tape in inside corners, the rolls must be swapped. The tape is automatically shaped to conform to corners. Tip from the professionals: The DécoLiss® for corner areas allows the joint tape to be pressed into the inside corner
• CONNECTION CEILING - WALL: - to apply the joint tape in the ceiling-wall area, it is recommended to use the large extension, which increases efficiency and reduces fatigue

Video: RollCut®: https://youtu.be/t0hSpSHXXB0