PJ 12F / Plasterboard edging profile with dilatation tape

*Profile used for plasterboard lining connection to window frame or to any plate ending anywhere, according to designer requirements*

**Advantages:**

* Solves problem of cracking and additional reparations
* Aesthetic solution
* Quick installation
* Joint duration

**Installation:**

* For a firm connection, the base has to be dry, even, free of adhered pollution, dust, and grease
* The shortened profile must be carefully laid on the edge of the plasterboard board
* Unpeel and fold back about 3 cm of the backing paper from the tape
* Attach the plasterboard board with the profile to the target position of the frame (windows, doors)
* Gradually remove the remaining backing paper from the tape and press the plasterboard board with attached profile against the frame so that the tape bonds over the entire surface
* Then perform mechanical anchoring of the plasterboard board for the lining of the opening
* To shorten the profile use scissors designed for work with plastic profiles
* Application temperature (the temperature of the window frame, window molding, and surrounding) must not be lower than 5°C
* At low temperatures and strong winds, there must be counted with a lower starting graininess and a longer time for the reaction of the adhesive