SBP / Mineral Decorative Plaster

• Mineral Binder-Based Render
• Compatible with certified insulation systems SAKRET ETICS EPS and SAKRET ETICS MW.
• Based on white cement.
• Comes in white and can be tinted with mineral pigments.
• Textured finish.
• Available in granule sizes of 2.0 mm and 3.0 mm.
• Easy to apply and plastic.
• High water vapor permeability.
• For painting, it is recommended to use primer SAKRET KS G and paint SAKRET KS.

Application:

• Surface Preparation:

  • The substrate must be dry and firm, with all cracks and voids filled.
  • Clean the substrate from less stable and/or separating layers.
  • The substrate must be primed with primer SAKRET PG.
  • If decorative render SAKRET SBP is applied to a highly absorbent surface, it should first be primed with SAKRET TGW or SAKRET BG, followed by SAKRET PG.
  • If decorative render SAKRET SBP is tinted, it is recommended to use tinted primer SAKRET PG for surface priming.

• Usage:

  • Containers and tools used for mixing and processing SAKRET SBP must be clean and rust-free.
  • Mix SAKRET SBP in a clean container with cold water until a homogeneous mass is achieved.
  • To avoid color tone discrepancies, it is important to dose water accurately and mix the entire contents of the bag at once.
  • After the maturation time (~3 minutes), remix thoroughly.
  • Apply SAKRET SBP to the substrate using a stainless steel trowel or float, ensuring the layer thickness is consistent with the granule size of the decorative render.
  • Create the decorative surface texture using circular movements with the trowel.
  • Do not dilute the material that has begun to set with water; instead, remix it.

Chemical Composition:

Cement, lime, inert and technological additives.

Video:

Watch here