SMS / Ready-Made Decorative Silicone-Silicate Plaster

• Combined Silicone and Silicate-Based Render
• Compatible with certified insulation systems SAKRET ETICS EPS and SAKRET ETICS MW.
• High hydrophobic properties, easy to apply, and plastic.
• Reinforced with polypropylene fibers.
• High mechanical strength.
• Available in textured (cottage cheese) and smooth (rain drop/curled) finishes.
• Granule sizes of 1.0 mm, 1.5 mm, and 2.0 mm.
• Comes in white and can be tinted.

Application:

• Surface Preparation:

  • The substrate must be dry and firm, with all cracks and voids filled.
  • Clean the substrate from less stable and/or separating layers.
  • The substrate must be primed with primer SAKRET PG.
  • If the decorative render is applied to a highly absorbent surface, it should first be primed with SAKRET TGW or SAKRET BG, followed by SAKRET PG.
  • If the decorative render is tinted, it is recommended to use tinted primer SAKRET PG for surface priming.

• Usage:

  • Containers and tools used for mixing and processing SAKRET SMS must be clean and rust-free.
  • Before use, thoroughly remix.
  • Apply the material to the substrate using a stainless steel trowel or float, ensuring the layer thickness is consistent with the granule size of the decorative render.
  • Create the decorative surface texture using circular motions (for the cottage cheese and curled textures) or vertical movements (for the rain drop texture) using a plastic float.

Chemical Composition:

Silicone resins, potassium silicate solution, synthetic reinforcing fibers, hydrophobizing agents, fillers, pigments, and additives.