BE / Concrete Floor / Concrete (C25)

Concrete Class C25

• Designed for the production of concrete and reinforced concrete structures.
• Excellent mechanical and climatic resistance.
• Water and frost resistant.

Preparation:

• The surface must be firm, stable, and free of cracks.
• Clean the surface of any less stable and/or detachable layers.
• Particularly dense and/or smooth substrates should be treated with abrasive material.
• Adhere to all preparation conditions for SAKRET BE specified on the material packaging.
• Use non-absorbent or weakly absorbent formwork when pouring concrete.
• Ensure adequate cover for reinforcement in reinforced concrete structures.
• For large horizontal structures, observe the intervals for expansion joints.
• Treat formwork with formwork oil.
• Pour the concrete evenly into the forms and compact it.
• Apply the mix at the required layer thickness, compact, level, and smooth it out.
• Do not fill expansion joints with concrete!
• Technical data applies at a temperature of +20°C and 50% relative humidity. Lower temperatures increase and higher temperatures decrease the specified values.
• Protect the mix during the curing phase from sunlight, drafts, and excessively high temperatures (>30°C).
• Protect fresh mortar from rain and too rapid drying.
• Once the mix has begun to set, do not add water!
• Immediately after mixing, wash out containers and tools with water.
• Cured mortar can only be removed mechanically.
• Contains cement; reacts alkaline.
• Protect skin and eyes, and follow technical instructions. If mortar comes into contact with eyes, rinse with plenty of water and seek medical attention if necessary.
• Protect packaging from weather effects, store on wooden pallets in a cool, dry place, and immediately cover any opened packaging.