LC / Lightweight Compound for Floors / Lightweight Concrete

Details:

• Product: SAKRET LC
• Use:
  • For constructing lightweight thermal and acoustic insulation floors.
  • To create a lightweight thermal and acoustic insulation layer under floor coverings.
  • For constructing lightweight, non-load-bearing vertical structures.
  • For filling various voids where high mechanical strength is not required.

Application:

• Preparation:

  • The surface must be firm, stable, and free from cracks.
  • Remove any less stable surface layers and detachable coatings.
  • Treat especially dense and/or smooth substrates with abrasive material.
  • Prime absorbent surfaces with SAKRET UG diluted with water in a ratio of 1:3.
  • For vertical constructions, use non-absorbent or weakly absorbent formwork; treat with formwork oil before pouring.

• Usage:

  • Mix SAKRET LC in a clean container with cold water until a homogeneous mass without lumps is formed.
  • When installing the floor, pour the mixture onto the prepared surface and level it out.
  • In large surface area constructions, observe the intervals for expansion joints.
  • Do not add water to the mixture once it starts to set!
  • From 15 kg of SAKRET LC, approximately 21 liters of mixture can be obtained.