PM Super / Cement-Lime Mortar

Details:

• Lime/cement-based
• Strength class - M5
• Excellent adhesion to all types of mineral surfaces
• Especially suitable for wet rooms
• For masonry, plastering, and repair work
• Excellent mechanical strength
• Available in gray
• High water vapor permeability

Application:

Surface Preparation:

• The substrate must be dry and solid, with all cracks and voids filled.
• Blocks or bricks should be clean and dry.
• Remove any loose or easily removable layers from the substrate.
• Particularly dense and/or smooth surfaces should be treated with an abrasive material.
• Highly absorbent surfaces should be primed with SAKRET BG or SAKRET UG primer (diluted at a ratio of 1:3).
• Smooth concrete surfaces should be primed with SAKRET QG primer.

Usage:

• Mix SAKRET PM Super in a clean container with cold water until a homogeneous mixture without lumps is achieved.
• It is recommended to use a mixer at 600 RPM.
• After a resting time of approximately 3 minutes, remix the compound.
• Technical data refers to a temperature of +20°C and 50% relative humidity. Lower temperatures increase, while higher temperatures reduce the indicated values.
• Protect the mixture during the curing phase from sunlight, drafts, and excessively high temperatures (>30°C).
• Keep fresh adhesive mortar protected from rain and avoid rapid drying.
• Once the mixture begins to set, do not add more water!
• Immediately after preparing the mixture, wash containers and tools with water.
• Cured mortar can only be removed mechanically.
• Contains cement; reacts alkaline.
• Protect skin and eyes; follow technical instructions. If the mixture gets in eyes, rinse with plenty of water and seek medical attention if necessary.
• Protect the packaging from weather effects; store on wooden pallets in a cool, dry place, and cover opened packaging immediately.