SP / Machine Filler for Dry Interior Spaces

Details:

• Suitable For: All traditional surfaces.
• Application Area: Dry rooms.
• Layer Thickness: Suitable for filling in thin and medium layers.
• Ready to Use: Pre-mixed and ready for application.
• Shrinkage: Low shrinkage.
• Color: Bright white color.
• Application Properties: Applies easily and plastically.
• Sanding: Sands easily and creates minimal dust.

Application Instructions:

• Surface Preparation:
  • The surface to be treated must be clean, stable, and dry.
  • For mineral surfaces, prime with SAKRET BG or SAKRET UG (diluted with water 1:4) before applying the filler.
  • For sandy or crumbling surfaces, prime with SAKRET TGW before filling.
• Filling:
  • The filler is designed for mechanical application in dry rooms.
  • After the filler has dried, sand the surface with sandpaper (150 - 240 grit).
  • If necessary, apply the filler in multiple layers.
• Conditions:
  • Work can be performed when the air temperature is ≥ +10°C and relative humidity ≤ 80%.
  • During the sanding process, dust does not rise into the air but falls gently to the ground.