TCM / Two-Component Waterproofing

• Designed for vertical and horizontal waterproofing of buildings
• Usable in areas with increased humidity—such as saunas, shower rooms, bathrooms, basements, balconies, terraces, and similar structures
• Suitable for storage of silage, sewage reservoirs, and livestock farms, under positive water pressure
• For indoor and outdoor applications
• Resistant to UV rays, frost-resistant, forming a flexible film
• Intended for application on rigid mineral substrates—concrete, porous concrete, brick masonry, plaster (CSII and CSIII class), etc.
• Designed for waterproofing under tile finishes

Application:

Surface Preparation:

• The surface must be dry and firm, with all cracks and voids filled
• Clean the substrate of less durable and/or detachable layers

Usage:

• In a clean container, pour a portion of the liquid component (B) and add the dry component (A), mixing until a homogeneous mass without lumps is achieved. Then add the remaining liquid component (B) to reach the desired consistency.
• After a maturation time of approximately 3 minutes, remix the mixture.
• Component ratio A
   
  = 2.5:1
• Material that has started to set should not be remixed with the liquid component!
• Apply the prepared waterproofing with a trowel or brush.
• The second layer should be applied perpendicular to the first layer.
• The two-component waterproofing must be processed within 60 minutes.
• Apply the second layer approximately 4-6 hours after the first layer has hardened and cannot be mechanically damaged.
• The curing time depends on temperature, humidity, and layer thickness.
• The thickness of one layer is up to 2mm.

Video:

Video 1
Video 2